Thaum kuaj cov xuab zeb thiab plua plav chamber, cov kev xav tau ntawm cua ceev yuav tsum:
●One is the blowing dust test,
●The other is the dust test,
●There is also a sand blowing test (MIL-STD-810G 510 Tshuab Plua Plav Thiab Xuab Zeb Xeem Tshuab)
Qhov yuav tsum tau ua rau cua ceev ntawm cov xuab zeb thiab plua plav kuaj chamber yog ntev npaum li nws tau ua kom ntseeg tau tias cov khoom sib cais hauv chav kuaj tsis muaj plua plav.
●Dust blowing normally: the minimum wind speed in the test should be >1.5m/s.
●The simulation is the sand and dust in the desert. Because of its heavy weight, the sand test wind speed is required to be between 18m/s-29m/s.(MIL-STD-810G 510 Blowing Dust And Sand Test Machine)
●The distance between the sand injection inlet and the test piece is generally 3m.
●In the wind speed range required by this test, high wind speed is rare, such as gust of 29m/s, but it is rarely used in the test.
●For the regulation of wind force in the dust suppression experiment, if the smoke and dust do not touch the dispersed specimen in the sand and dust aging test chamber, the wind force can be lower than 0.2m/s.
●For example, to simulate the sandstorm in the desert, because of its large net weight, the wind force should be >8,9m / s. Tau kawg, yog tias qhov ntawd yog qhov teeb meem, lub zog cua yuav tsum siab dua.
